How to install Rogero 4.41 v1.00 on your PS3

Written by Tech84 on June 17, 2013

Update: Rogero has released an new update with Rogero 4.46 v1.00.

Rogero has finally updated his popular PS3 cfw with the Rogero 4.41 cfw. The PS3 Official firmware 4.41 has been out for some time now and it’s only recently that Rogero has made an update to with Rogero 4.41 cfw.

How to install Rogero 4.40 v1.03 on your PS3

Here’s how to install Rogero 4.41 v1.00 on your PS3:

Installation Files:
Download Rogero 4.41 v1.00 cfw here (Mirror Here) (another mirror here)(and another mirror here)

A USB Flash drive that’s big enough to accommodate the installation files. Or a PS3 External Hard Drive or a plain External HD (Must be Fat32 Format).
A PS3 running Official Firmware version 3.55 or
A PS3 running on any CFW ver: 3.55/4.21/4.30/4.40
NOTE: Will not work on any PS3 running any OFW higher than 3.55.

Here are the steps(The same as with my article on How to install Rogero 4.40 cfw):
Remove any discs inside your PS3 when performing the update.

1. Download the file “Rogero_CEX_4.41_v1.00.PUP“ and rename it to PS3UPDAT.PUP
2. Create a new folder on the Root of your USB flash drive or External HD and name it “PS3” ( it would look like this: x:PS3 where X is the drive)
3. Create a new folder inside the “PS3” folder we just created and name it “UPDATE” . ( it would now look like this: x:PS3/UPDATE)
4. Copy the PS3UPDAT.PUP file we renamed and place it inside the “UPDATE” folder we just created. ( it should now go something like this: x:PS3/UPDATE/PS3UPDAT.PUP)
5. Insert your USB or External HD into your PS3
6. Turn on your PS3, go to System update and select “Update via Storage Media”
7. Just follow any on screen instructions that would come up.
8. And you’re done!

Here’s whats included with the Rogero 4.41 cfw:

ReactPSN patch to work offline without the need to log into PSN at all.
noBD/noBT patches to allow installation on consoles with broken BluRay Drive or Bluetooth board.
This CFW can be installed fine from XMB Update over OFW3.55 or any CFW ver: 3.55/4.21/4.30/4.40/4.41
HDD can be swapped/changed and the CFW will re-install without any problem.
Patched LV1 to disable LV2 Protection.
Patched LV1 to add peek/poke support.
Patched LV1 Core OS Hash Check (to prevent Bricking on non-dehashed downgraded consoles)
Patched LV2 to add peek/poke support.
QA Flag enabled by default to allow for easier downgrading using Recovery Menu.
RSOD screen bypass patch for RSOD machines (it won’t fix the RSOD but allows the PS3 to boot fine into XMB)
PSN/SEN access is available but it’s not recommended.
It can run games signed with Keys up to version 4.41 without any Eboot/Sprx patching needed.
The CFW can be used directly for Downgrading with Hardware flashers using the new tool PS3 Nor and Nand Auto Patcher v0.05

Credits to Rogero over at Tortuga-Cove

“This CFW was tested on most PS3 Models by different testers and no problems were encountered. But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.” – Rogero

And there you have it, and after updating to Rogero 4.41 you might also want to update to the latest Multiman which is Multiman 4.40.00. Here’s the link on the new Multiman 4.40.00 update.

You may also like:

25 Responses to “How to install Rogero 4.41 v1.00 on your PS3”

  1. Thank You! Rogero you are a life saver (Last Of Us here I come!) and, i couldn’t have done it without your help! THX!

  2. gs says:

    hai sir but file not download any link are mirro and mirror another mirror r not working so please tell me how to download this file
    i am form india…

  3. samuel8311 says:

    the 4.41 cfw is useless because you cannot play your jailbreak games. the bd-rom emulator is missing. i updated my ps3 to 4.41cfw from 4.40cfw and i wasn’t able to play my back up games. an error message appeared. this cfw doesn’t work at all. don’t you bother download the 4.41cfw..

  4. Matheus says:

    Didnt work for me =/
    my ps3 is running on 4.41, it recognizes the 4.41 “jailbreak update” but when it reaches 72% a message appears saying “data corrupted” or something like this..

  5. Morpheus2013 says:

    I got the same message.
    Ta 78% i got “file corupted”,evey time.

    Can someone help.


  6. gs says:

    hi sir
    i am how to play ps2 games in rogero 4.41

  7. Gene says:

    I have the same error where at 72%, it fails. How do I fix this? I have the correct Pendrive settings (FAT32), I have the right folder names and file names
    (PS3 -> UPDATE -> PS3UPDAT.PUP) I need help, and so do others. Please!

  8. Tetouan says:

    is there any way to jaibreak the OFW 3.66??
    plz respond

  9. afif says:

    can i use this CFW in my PS3 (serial number ending : cech-2506B)..
    currently i’m still using 3.41 version..
    is it still need to upgrade to 3.55 first?
    or it can be directly upgrade to 4.41v1.00?


  10. KingDeph says:

    any chance you revisit this tutorial for rogero 4.46? it’s out

  11. Chris says:

    My ps3 wont load backups anymore after this update

  12. Ibrahim says:

    Thanks a lot, it solved the problem of the new game which were not woke before

Leave a Reply

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...